Archives: Products

DC Motors

August 26, 2015

Permanent Magnet Direct Current brush type motors are a great option for applications with high starting torque requirements because of their linear speed-torque curve. DC motors and gearmotors have a standard brush life of 2000+ hours, and they are great for applications with easily accessible motors and operations that don’t require a long life. Because speed and voltage are linearly […]

Universal Motors

August 26, 2015

Universal motors are great for shorter life applications needing extremely high speeds (20,000+ RPMs), high starting torque and high power density. They have a higher power density than other motor types because the open design and fan allow heat to dissipate better. Universal motors are unique in that they can operate on either AC or DC power. […]

Brushless Motors

August 26, 2015

Brushless DC Motors combine the life-extending and easy-to-maintain configurations of AC induction motors with and high starting torque and good speed regulation of brush type PM motors. This “best of both” motor allows for superior efficiency and power density at a very quiet noise level. Because BLDC motors use rare earth magnets as opposed to the […]

AC Motors

August 26, 2015

AC motors (alternating current) are a great choice for applications needing relatively low, consistent speed over a wide range of torque. Groschopp offers two and four pole induction motors with single and three phase inputs making it easy to find the right fit. AC induction motors are a great option for low power and low starting torque applications where […]

Parallel Shaft

September 30, 2015

DC Parallel Shaft gearmotors are a better choice for continuous duty applications than planetary DC gearmotors because their gear configurations provide a higher level of efficiency. They provide the highest maximum input speed of Groschopp’s gearbox choices. Parallel shaft gearmotors combine the high starting torque of a DC motor with the capabilities of a parallel shaft gearmotor. This […]

Planetary

October 6, 2015

DC Planetary gearmotors have a higher yield strength than parallel shaft gearmotors in the same size package because there is more surface area working within the gears of planetary gearmotors. The in-line configuration of the spur gears in planetary gearmotors combined with the high starting torque of PMDC motors gives DC Planetary gearmotors nearly three times the […]

Right Angle

October 6, 2015

The reduction achieved using worm gears make DC Right Angle gearmotors a good fit for intermittent and continuous duty operations in tight spaces. Right angle gearmotors are non-back-drivable (they do not move when power is cut from the motor) at ratios of 30:1 and above.  DC Right Angle gearmotors combine the high starting torque of a DC motor with […]

Right Angle Planetary

October 6, 2015

DC Right Angle Planetary gearmotors are built using spur and bevel gears, making them much more efficient than right angle worm gearmotors. DC Right Angle Planetary gearmotors couple the high torque of standard planetary gearboxes with the 90° turn capabilities of right angle gearboxes to create a powerful combination of size and torque suitable for applications that […]

Parallel Shaft

October 6, 2015

AC Parallel shaft gearmotors are a better choice for continuous duty applications than planetary gearmotors because their gear configurations provide a higher level of efficiency. They provide the highest maximum input speed of Groschopp’s gearbox choices. AC Parallel Shaft gearmotors can reach slightly higher speeds than DC Parallel Shaft gearmotors with little slip. This works well for applications […]

Right Angle Planetary

October 6, 2015

AC Right angle planetary gearmotors are built using spur and bevel gears, making them much more efficient than right angle worm gearmotors. Right Angle Planetary gearmotors couple the high torque of standard planetary gearboxes with the 90° turn capabilities of right angle gearboxes to create a powerful combination of size and torque suitable for applications that […]

How to use the Motor Search Tool

Narrow your search by selecting motor type, gearbox, voltage, and phase options for your desired motor.

Select a dominant variable: choose one of the three parameters to narrow your search. The selected variable determines which slider bar you will be able to manually move.

Use the slider corresponding to your dominant variable to further narrow your motor selection. The other sliders will automatically move to show available ranges based on the range of your selected variable.

Results will upload as your search criteria changes. If you have any questions regarding your results or how to use the search tool, you can chat with us using the green tab on the left-hand side of your screen.


Note: Groschopp Universal motors are custom built to fit your application so no additional options are available to narrow the search. Selecting the Universal motor type will prompt a message taking you to the Universal product page.

Not sure what you need?

One of our team members would be happy to help. Contact us at 800-829-4135 or by email at sales@groschopp.com. You can also chat with us using the green tab on the left side of your screen.

send us an email

Universal Motors

Groschopp Universal motors are custom built to fit your application so no additional options are available to narrow the search. Standard frame sizes and motor features can be found on the Universal page.

go to Universal page