AC Control: 750-10-0004

The AC Control 750-10-0004 is an energy saving control option as it only uses the power required for the application, complete with a flux vector control with static auto-tune. This AC motor control provides overload protection protecting your motor from burnout. It has 3-phase drive output. Contact one of our technical sales staff today to discuss which AC Motor and control package is the best solution for you.

AC Line Input Drive Output  
Voltage (V) 50/60 Hz PHASE (O) Maximum Current (A) Fuse or circuit breaker rating (A) Voltage range (V) PHASE (O) Max. cont. load current (RMS A/0) Max. power Enclosure Type
HP KW
115 1 4.0 5 0-230 3 1.0 1/10 0.07 IP50
208/230 2.5 5

groschopp-motor-control-outline

Diagnostic LEDs Flux vector control with static auto-tune
Dual voltage AC line input Regeneration protection
Motor overload I²T with RMS current limit Simple to operate
Undervoltage/overvoltage protection Features: acceleration, deceleration, brake, inhibit
Factory installed ON/OFF AC line switch and main speed potentiometer Speed regulation ±2 1/2% base speed
Forward-stop-reverse switch Speed range: 60:1
Short circuit protection Length: 6.06 in.
Jumper selection from drive output frequency (J1 and J2) Width: 3.92 in.
Automatic and manual start (CON1), and motor direction (CON2) Height: 3.65 in.
Electronic inrush current limit

How to use the Motor Search Tool

Narrow your search by selecting motor type, gearbox, voltage, and phase options for your desired motor.

Select a dominant variable: choose one of the three parameters to narrow your search. The selected variable determines which slider bar you will be able to manually move.

Use the slider corresponding to your dominant variable to further narrow your motor selection. The other sliders will automatically move to show available ranges based on the range of your selected variable.

Results will upload as your search criteria changes. If you have any questions regarding your results or how to use the search tool, you can chat with us using the green tab on the left-hand side of your screen.


Note: Groschopp Universal motors are custom built to fit your application so no additional options are available to narrow the search. Selecting the Universal motor type will prompt a message taking you to the Universal product page.

Not sure what you need?

One of our team members would be happy to help. Contact us at 800-829-4135 or by email at sales@groschopp.com. You can also chat with us using the green tab on the left side of your screen.

send us an email

Universal Motors

Groschopp Universal motors are custom built to fit your application so no additional options are available to narrow the search. Standard frame sizes and motor features can be found on the Universal page.

go to Universal page